hAP
˂
  • hAP
˃

hAP

Brand : Mikrotik
Availability : Out Of stock  
Product Code : RB951Ui-2nD

This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas.

The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.

hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.


Select Color:

Product specifications

Details
Product code RB951Ui-2nD
10/100 Ethernet ports 5
CPU nominal frequency 650 MHz
Wireless chip model QCA9531
Number of USB ports 1
PoE out Yes
Number of chains 2
802.11b Yes
802.11g Yes
Size of RAM 64 MB
CPU core count 1
802.11n Yes
Supported input voltage 6 V - 30 V
Wireless standards 802.11b/g/n
Operating System RouterOS
License level 4
USB Power Reset Yes
USB slot type USB type A
Storage type FLASH
Storage size 16 MB
Tested ambient temperature -30 + 70 C
CPU QCA9531
Power Jack 1
PoE in Yes
Dimensions 113 x 89 x 28mm
Max Power consumption 5W
Antenna gain 1.5
   

Ethernet test results

RB951Ui-2nD QCA9531 (650Mhz) 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 40.6 493.0 117.4 480.9 217.0 111.1
Bridging 25 bridge filter rules 40.6 493.0 70.1 287.1 70.9 36.3
Routing none (fast path) 40.6 493.0 117.4 480.9 200.8 102.8
Routing 25 simple queues 40.6 493.0 79.6 326.0 90.8 46.5
Routing 25 ip filter rules 40.6 493.0 42.2 172.8 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Related Products