RB2011iL-RM
˂
  • RB2011iL-RM
  • RB2011iL-RM
˃

RB2011iL-RM

Brand : Mikrotik
Availability : Out Of stock  
Product Code : RB2011iL-RM

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. 

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. 

The RB2011iL-RM includes a new feature - power injector on Ethernet port 10 - it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports for unbeliveable USD 99! 

RouterBOARD 2011iL-RM comes with 1U rackmount enclosure and power supply.


Select Color:

Product specifications

Details
Product code RB2011iL-RM
CPU AR9344
Storage type NAND
CPU core count 1
Storage size 128 MB
Power Jack 1
PoE in Yes
CPU nominal frequency 600 MHz
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 5
License level 4
Architecture MIPS-BE
Size of RAM 64 MB
PoE out Yes
Supported input voltage 8 V - 30 V
Operating System RouterOS
Tested ambient temperature -35C to +65C
Max Power consumption 6W
   

Ethernet test results

RB2011iL-RM AR9344 1G&100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 122.0 1,481.6 232.0 950.3 269.6 138.0
Bridging 25 bridge filter rules 83.6 1,015.2 86.0 352.3 87.6 44.9
Routing none (fast path) 122.0 1,481.6 210.0 860.2 226.9 116.2
Routing 25 simple queues 100.5 1,220.5 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 56.8 689.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Related Products